Rohde & Schwarz SMBV100B - Page 762

Remote Control Commands
R&S
®
SMBV100B
760User Manual 1178.4460.02 ─ 03
Example: See Example "Creating a multi-segment waveform"
on page 740.
Manual operation: See "Level" on page 205
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent <Comment>
Enters a comment for the selected configuration file.
Parameters:
<Comment> string
Example: See Example "Creating a multi-segment waveform" on page 740
Manual operation: See "Comment" on page 201
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete
<Filename>
Deletes the selected configuration file.
Setting parameters:
<Filename> string
Example: See Example "Creating a multi-segment waveform"
on page 740.
Usage: Setting only
Manual operation: See "Append/Delete/Shift Seg. Up/Down" on page 204
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:OFILe <OFile>
Defines the file name of the output multi-segment waveform.
Parameters:
<OFile> string
Example: See Example "Creating a multi-segment waveform" on page 740
Manual operation: See "Save List/Save List As..." on page 201
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend
<Waveform>
Appends the specified waveform to the configuration file.
Setting parameters:
<Waveform> string
Example: see Example "Creating a multi-segment waveform" on page 740
Usage: Setting only
Manual operation: See "Append/Delete/Shift Seg. Up/Down" on page 204
SOURce Subsystem