Monitoring Signal Characteristics
R&S
®
SMBV100B
419User Manual 1178.4460.02 ─ 03
Note: This function is available for enlarged graphical signal displays and in the con-
text menus of the thumbnails.
Stop / Run
Stops the processing of the displayed signal and freezes it.
"Run" continues a stopped displayed signal.
Zoom Out
Resets a previous zoom, see also "To zoom into a diagram" on page 424.
Reference Curves
Accesses the dialog for defining reference curves, see "Reference Curve"
on page 419.
Display Units
Changes the units of the X-axis. The available values depend on the generated signal.
Show / Hide marker
Sets two markers to the displayed signal or hides them.
See also:
●
"Using markers" on page 413
●
"To enable markers to readout exact measured data" on page 424
Reference Curve
Enable the indication of up to five configurable reference curves (traces).
See "Reference trace" on page 414.
Displaying Baseband Signal Characteristics in Real-Time
To Next Page
Loading...
