Rohde & Schwarz SMBV100B - Page 682

Remote Control Commands
R&S
®
SMBV100B
680User Manual 1178.4460.02 ─ 03
Usage: Event
Manual operation: See "Execute Trigger" on page 523
[:SOURce]:INPut:USER:CLOCk:LEVel <Level>
[:SOURce]:INPut:USER:TRIGger:LEVel <Level>
Sets the threshold for any input signal at the User1-2 connectors.
Parameters:
<Level> float
Range: 0.1 to 2
Increment: 0.1
*RST: 1
Example: See Example "Global connectors settings configuration"
on page 677.
Manual operation: See "Threshold User1-2 Input" on page 524
[:SOURce]:INPut:USER:PULM:LEVel <Level>
Sets the threshold for any input signal at the User3-5 connectors.
Parameters:
<Level> float
Range: 0.1 to 2
Increment: 0.1
*RST: 1
Default unit: V
Example: See Example "Global connectors settings configuration"
on page 677.
Manual operation: See "Threshold User3-5 Input/Threshold Pulse Input"
on page 524
[:SOURce]:INPut:USER:CLOCk:IMPedance <Impedance>
[:SOURce]:INPut:USER:TRIGger:IMPedance <Impedance>
Selects the input impedance for the external trigger inputs.
Parameters:
<Impedance> G1K | G50
*RST: G1K
Example: See Example "Global connectors settings configuration"
on page 677.
Manual operation: See "Impedance Clock/Trigger Input" on page 524
SOURce Subsystem