Rohde & Schwarz SMBV100B - Page 756

Remote Control Commands
R&S
®
SMBV100B
754User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect...........................................756
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend..........................................756
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate...........................................................756
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad............................................................757
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE..............................757
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment....................... 757
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment........................757
[:SOURce<hw>]:BB:ARBitrary:TRIGger:SMODe............................................................... 758
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
Queries the index of the currently processed segment.
Return values:
<WSegment> integer
Range: 0 to 1023
*RST: 0
Example: see Example "Configuring the output order of the segments"
on page 741
Usage: Query only
Manual operation: See "Current Segment/Current Segment Index" on page 212
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
Queries the name of the waveform of the currently output segment of the multi-seg-
ment waveform.
Return values:
<Name> string
Example: See Example "Configuring the output order of the segments"
on page 741
Usage: Query only
Manual operation: See "Current Segment/Current Segment Index" on page 212
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT <Next>
Selects the segment to be output.
Parameters:
<Next> integer
Range: 0 to 1023
*RST: 0
Example: see Example "Configuring the output order of the segments"
on page 741
Manual operation: See "Segment" on page 213
SOURce Subsystem