Rohde & Schwarz SMBV100B - Page 848

Remote Control Commands
R&S
®
SMBV100B
846User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRAPeze:PERiod <Period>
Sets the period of the generated trapezoid shape. The period determines the repetition
frequency of the internal signal.
Parameters:
<Period> float
Range: 1E-6 to 100
Increment: 1E-8
*RST: 1E-3
Example: See Example "Configuring the LF generator" on page 838.
Manual operation: See "Period" on page 367
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRAPeze:RISE
<Rise>
Selects the rise time for the trapezoid shape of the LF generator.
Parameters:
<Rise> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 250E-6
Example: See Example "Configuring the LF generator" on page 838.
Manual operation: See "Trapezoid Rise / Fall" on page 368
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRIangle:PERiod <Period>
Sets the period of the generated pulse. The period determines the repetition frequency
of the internal signal.
Parameters:
<Period> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 0.001
Example: See Example "Configuring the LF generator" on page 838.
Manual operation: See "Period" on page 367
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRIangle:RISE <Rise>
Selects the rise time for the triangle single of the LF generator.
Parameters:
<Rise> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 0.5E-3
SOURce Subsystem