ZyXEL Communications MSC1000G - Page 762

Chapter 29 port Commands
Management Switch Card User’s Guide
762
edgerouter delete <ip-address>
<vid>
Deletes the specified edge router settings. 8
set <ip-address>/
<mask> <vid>
Sets the edge router. 8
show all
Displays the list of edge routers. 1
show <domain-name>
[<vid>]
Displays details for the edge router for the
specified domain name and optionally for the
specified VLAN ID.
1
interface delete <ip-address>/
<mask> <vid>
Deletes an IP interface. 8
set <ip-address>/
<mask> <vid> [<slot-
port-vpi/vci>]
Sets the interface. 8
show all|<ip/
mask>|<vid>|<ip/
mask> <vid>
Displays interface settings, including IP address,
subnet mask and VLAN ID settings if specified.
1
route delete <domain-name>
<ip/mask> <nexthop>
Deletes a route entry from specified domain.
nexthop: This is the IP address of the edge router
or gateway device for this route.
8
set <domain-name>
<ip/mask> <nexthop>
<metric> [<priority>]
Sets a new route to the specified edge router for a
given domain. Maximum 16 routes in a domain.
nexthop: This is the IP address of the edge router
or gateway device for this route.
metric: This is the number of hops in a route.
priority: This is the VLAN priority tag inserted
into a VLAN frame which uses this route.
8
show [<domain name> |
<ip/mask> | <domain>
<ip/mask>]
Displays the current routing table for the specified
domain.
1
set <slot-port-vpi/vci>
<profile> <vid>
<priority> <type>
Sets an IP aware Bridge PVC.
type: The connection type. Options are llc, vc,
llc_r, vc_r.
8
show <slot>|<slot-
port>|<slot-port-
vpi/vci>
Displays IP aware Bridge PVC settings. 1
vlan <slot-port-vpi/vci>
<vid> <registration>
<
tag>
Sets the VLAN attributes of a PVC. 8
mdf <slot-port>
<mdf_info>
Sets the MDF (Main Distribution Frame) name for
information storage.
8
name <slot-port>
<name>
Sets a name for a subscriber port. 8
paepvc delete <slot-port-vpi/vci>
Removes a PAE PVC (PPPoA-to-PPPoE PVC). 8
Table 364 port Commands (continued)
COMMAND DESCRIPTION P