Daedong CK22 - Clutch Lever Wear; Thrust Ball Bearing

3-12
DS35-W00 May. 2007
CLUTCHCLUTCH CLUTCHCLUTCH
CLUTCH
TRANSMISSIONTRANSMISSION TRANSMISSIONTRANSMISSION
TRANSMISSION
ENGINEENGINE ENGINEENGINE
ENGINE
HSTHST HSTHST
HST
FRONT AXLEFRONT AXLE FRONT AXLEFRONT AXLE
FRONT AXLE
STEERINGSTEERING STEERINGSTEERING
STEERING
BARKEBARKE BARKEBARKE
BARKE
ELECTRICELECTRIC ELECTRICELECTRIC
ELECTRIC
INDEXINDEX INDEXINDEX
INDEX
HYDRAULICHYDRAULIC HYDRAULICHYDRAULIC
HYDRAULIC
GENERALGENERAL GENERALGENERAL
GENERAL
REAR AXLEREAR AXLE REAR AXLEREAR AXLE
REAR AXLE
CK22/CK22H
5.2.4 THRUST BALL BEARING
1. Check the contact area for excessive wear.
2. With inner wheel seized and outer wheel loaded,
check for abnormal noise or operation.
3. If faulty, replace it.
5.2.5 CLUTCH LEVER WEAR
1. Measure the contact portion O.D. of the clutch lever
with an outside micrometer.
2. If the measurement exceeds the allowable limit, re-
place it.
196W318A
196W319A
Item
Clutch lever O.D.
Factory spec.
14.967 ~ 15.000 mm
0.5893 ~ 0.5906 in.
• When assembling the bearing, make sure not to
apply force to the bearing ball or taper roller.
CAUTION
CLUTCH - SERVICING