Daedong CK22 - Fuel Feed Pump and Injection Pump

2-49
DS35-W00 May. 2007
CLUTCHCLUTCH CLUTCHCLUTCH
CLUTCH
TRANSMISSIONTRANSMISSION TRANSMISSIONTRANSMISSION
TRANSMISSION
ENGINEENGINE ENGINEENGINE
ENGINE
FRONT AXLEFRONT AXLE FRONT AXLEFRONT AXLE
FRONT AXLE
STEERINGSTEERING STEERINGSTEERING
STEERING
BARKEBARKE BARKEBARKE
BARKE
ELECTRICELECTRIC ELECTRICELECTRIC
ELECTRIC
INDEXINDEX INDEXINDEX
INDEX
HYDRAULICHYDRAULIC HYDRAULICHYDRAULIC
HYDRAULIC
GENERALGENERAL GENERALGENERAL
GENERAL
REAR AXLEREAR AXLE REAR AXLEREAR AXLE
REAR AXLE
HSTHST HSTHST
HST
CK22/CK22H
3
2
1
2
B. INJECTION PUMP
1. Remove the injection pipes (1) and the intake mani-
fold (2).
2. Remove the overflow pipe (3).
196W269B
(1) Fuel feed pump assembly (2) Cover
7.1.7 FUEL FEED PUMP AND INJECTION
PUMP
A. FUEL FEED PUMP
ff
ff
f REMOVING FUEL FEED PUMP
1. Remove the two fuel feed pump mounting nuts.
2. Detach the fuel feed pump.
3. Remove the injection pump cover(2).
(Note for assembling)
• Be careful the install the fuel feed pump in the right
direction.
• Install the fuel feed pump gasket after applying non-
drying adhesive to it.
T46W298B
(1) Injection pipes
(2) Intake manifold
(3) Overflow pipe
2
T46W299A
(1) Stop solenoid
(2) Stop solenoid guide
3. Remove the stop solenoid (1) with guide (2).
ENGINE - SERVICING