Daedong CK22 - Disassembling the HST Assembly and Front Wheel Drive Assembly

4-31
DS35-W00 May. 2007
CLUTCHCLUTCH CLUTCHCLUTCH
CLUTCH
TRANSMISSIONTRANSMISSION TRANSMISSIONTRANSMISSION
TRANSMISSION
ENGINEENGINE ENGINEENGINE
ENGINE
HSTHST HSTHST
HST
FRONT AXLEFRONT AXLE FRONT AXLEFRONT AXLE
FRONT AXLE
STEERINGSTEERING STEERINGSTEERING
STEERING
BARKEBARKE BARKEBARKE
BARKE
ELECTRICELECTRIC ELECTRICELECTRIC
ELECTRIC
INDEXINDEX INDEXINDEX
INDEX
HYDRAULICHYDRAULIC HYDRAULICHYDRAULIC
HYDRAULIC
GENERALGENERAL GENERALGENERAL
GENERAL
REAR AXLEREAR AXLE REAR AXLEREAR AXLE
REAR AXLE
CK22/CK22H
4.19 DISASSEMBLING THE HST AS-
SEMBLY AND FRONT WHEEL
DRIVE ASSEMBLY
A. DISASSEMBLING THE HST ASSEMBLY
(CK22H)
1. Remove the bolts (1).
2. Disconnect the front axle case (3) from HST case
(2) as a unit.
3. Remove the bolt and the joint (4).
4. Remove the volts and HST case (2).
5. Remove the bolts (1) and nuts (2).
6. Remove the joint bolts (5, 10), HST return tubes (6,
7, 8), disconnect the HST assembly(3) from the
middle case (4).
7. Tap out the HST assembly (3).
(1) Bolt (6) HST return tube 1
(2) Nut (7) HST return tube 2
(3) HST assembly (8) HST return tube 3
(4) Middle case (9) Drain tube
(5) Joint Bolt (10) Joint bolt
196W452A
196W455A
(1) Bolt (3) Front axle case
(2) HST Case (4) Joint
B. DISASSEMBLING THE FRONT WHEEL
DRIVE ASSEMBLY (CK22)
1. Remove the bolts (1).
2. Take out the front wheel drive assembly (2).
(1) Bolt
(2) Front wheel drive assembly
196W456A
Item
Joint bolt
Tightening torque
44.1 Nm
4.5 kgf-m
32.5 lb-ft
TRANSMISSION - SERVICING