Daedong CK22 - Specifications

1-5
DS35-W00 May. 2007
CLUTCHCLUTCH CLUTCHCLUTCH
CLUTCH
TRANSMISSIONTRANSMISSION TRANSMISSIONTRANSMISSION
TRANSMISSION
ENGINEENGINE ENGINEENGINE
ENGINE
HSTHST HSTHST
HST
FRONT AXLEFRONT AXLE FRONT AXLEFRONT AXLE
FRONT AXLE
STEERINGSTEERING STEERINGSTEERING
STEERING
BARKEBARKE BARKEBARKE
BARKE
ELECTRICELECTRIC ELECTRICELECTRIC
ELECTRIC
INDEXINDEX INDEXINDEX
INDEX
HYDRAULICHYDRAULIC HYDRAULICHYDRAULIC
HYDRAULIC
GENERALGENERAL GENERALGENERAL
GENERAL
REAR AXLEREAR AXLE REAR AXLEREAR AXLE
REAR AXLE
CK22/CK22H
MECHANICAL
17.6 (13.1)
Synchro/constant
6F 2R
Trans
1.10 - 16.24
(0.68 - 10.09)
1.36 - 6.31
(0.85 - 3.92)
890 (1,962)
HST
17.2 (12.8)
Hydrostatic
INF.2
Live continuous
0 - 14.97
(0 - 9.30)
0 - 9.37
(0 - 5.82)
904 (1,993)
3C100A
Liquid-cooled, 3-cylinder diesel
22 (16.4)
1,007 (61.45)
2,800
20 (5.28)
Dry type single stage
Standard
Wet disc type
1 speed (540 rpm at 2,646 engine rpm)
1 speed (2,000 rpm at 2,706 engine rpm)
29 (7.66)
Cat.I
503 (1,109)
Position control
Hydrostatic
6 - 12 (23 x 8.50 - 12, 23 x 8.50 - 12)
9.5 - 16 (33 x 12.5 x 16.5, 12 - 16.5)
2,684 (105.7)
1,121 (44.1)
1,970 (77.5)
1,470 (57.9)
310 (12.2)
910 (35.8)
890 - 935 (35.0 - 36.8)
2.3 (7.5)
250 (551)
812 (1,790)
Model
Type
Engine gross HP (kW)
P.T.O HP (kW)
Displacement cc (cu.in)
Rated revolution r.p.m min-1
Fuel tank capacity (gal.)
Clutch
Transmission
Speeds
Differential lock
Brake
P.T.O
Rear (rpm)
Mid (rpm)
Pump capacity (Max. flow rate) /min (gpm)
3-point hitch
Maximum lifting capacity (24in. aft of hitch)
kgf (lbs.)
Hydraulic lift control system
Steering
Front (AG, TURF, INDUSTRIAL)
Rear (AG, TURF, INDUSTRIAL)
Forward (At rated engine rpm)
km/h (mph)
Reverse (At rated engine rpm)
km/h (mph)
Overall length (with 3p) mm (in.)
Overall width (minimum tread) mm (in.)
Overall height (Top of ROPS) mm (in.)
Wheel base mm (in.)
Min. ground clearance mm (in.)
Tread Front mm (in.)
Rear mm (in.)
Min. turning radius (with brake) m (Ft.)
Weight (with ROPS) kgf (lbs.)
Max. Drawbar load kg (lbs.)
Max. Trailer loading weight kg (lbs.)
Engine
Drive train
Hydraulic
system
Standard
tire size
Traveling
speeds
Dimen-
sions
Other
spec.
3. SPECIFICATIONS
MODEL
NOTE: The specifications are subject to change for the purpose of improvement without any notice.
GENERAL - SPECIFICATIONS