Daedong CK22 - Separating Rops and Tires; Fender

7-8
DS35-W00 May. 2007
CLUTCHCLUTCH CLUTCHCLUTCH
CLUTCH
TRANSMISSIONTRANSMISSION TRANSMISSIONTRANSMISSION
TRANSMISSION
ENGINEENGINE ENGINEENGINE
ENGINE
HSTHST HSTHST
HST
FRONT AXLEFRONT AXLE FRONT AXLEFRONT AXLE
FRONT AXLE
STEERINGSTEERING STEERINGSTEERING
STEERING
BARKEBARKE BARKEBARKE
BARKE
ELECTRICELECTRIC ELECTRICELECTRIC
ELECTRIC
INDEXINDEX INDEXINDEX
INDEX
HYDRAULICHYDRAULIC HYDRAULICHYDRAULIC
HYDRAULIC
GENERALGENERAL GENERALGENERAL
GENERAL
REAR AXLEREAR AXLE REAR AXLEREAR AXLE
REAR AXLE
CK22/CK22H
4.1.3 SEPARATING ROPS AND TIRES
1. Remove the lynch pin (2) and the lock pin (1) from
the ROPS frame.
2. Loosen the lock nuts (3) and remove the pin (4).
3. Place to fix the jacket to the bottom of the rear axle.
4. Remove the nuts & bolts from the wheel.
196W620A
(1) Lock pin (3) Bolt
(2) Lynch pin (4) Pin
196W621A
Item
Fender
support bolt
ROPS
support bolt
Tightening torque
77.5 ~ 90.1 Nm
7.9 ~ 9.2 kgf-m
57.2 ~ 66.5 lb-ft
124 ~ 147 Nm
12.6 ~ 15.0 kgf-m
91.2 ~ 108 lb-ft
Spec.
M12
M14
(1) Cover
(2) Frame
(3) Bracket
(4) Handle grip
(5) Lever guide
(6) Fender
(7) Fender support
Item
ROPS lock
bolt
Rear Wheel
blots, nuts
Tightening torque
48.1 ~ 55.8 Nm
4.9 ~ 5.7 kgf-m
35.5 ~ 41.2 lb-ft
215 Nm
22 kgf-m
160 lb-ft
Spec.
M10
M16
4.1.4 FENDER
1. Remove the joystick mounting bolts and disconnect
the cover (1).
2. Remove the frame (2).
3. Rmove the connect of the rear combi lamp, turn sigal
lamp and working lamp.
4. Remove the ROPS mounting bracket (3).
5. Remove the grip (4) from the levers and then re-
move the lever guide (5).
6. Remove the fender (6).
7. Remove the fender support (7).
NOTE:
• For installation, follow the same procedure in re-
verse order.
BRAKE - SERVICING