Fuji Xerox DocuCentre SC2020 Service Manual

05/2014
6-220
DC SC2020
6.4.9.2 Print Settings (Print Printer Settings Data)
Version 1.1
General
6.4.9.2 Print Settings (Print Printer Settings Data)
Prints the printer settings data (Below) (printable paper size is A4).
• Serial No. (Serial No.)
• HexDump (HexDump ON/OFF data)
• Tone Correction (IOT tone correction ON/OFF data)
• MeterType (meter type data)
• Print Full Color Count (Print Full Color Count)
• Print Color 1 Count (toner save print count)
• Print Color 2 Count (few-colored color printing count)
• Print B/W Count (monochrome print count)
• Print Total Count (total print count)
• Print Full Color BackUp Count (full color print backup count)
• Print Color 1 BackUp Count (toner save backup print count)
• Print Color 2 BackUp Count (few-colored backup color printing count)
• Print B/W BackUp Count (backup monochrome print count)
• Print Total BackUp Count (backup total print count)
• Print Full Color Error Count (full color print error count)
• Print Color 1 Error Count (toner save print error count)
• Print Color 2 Error Count (few-colored color error print count)
• Print B/W Error Count (monochrome print error count)
• Copy Full Color Count
• Copy Color 2 Count
• Copy B/W Count
• Copy Total Count
• Copy Full Color BackUp Count
• Copy Color 2 BackUp Count
• Copy B/W BackUp Count
• Copy Total BackUp Count
• Copy Full Color Error Count
• Copy Color 2 Error Count
• Copy B/W Error Count
• FAX Color Count
• FAX B/W Count
• FAX Total Count
• FAX To Server Page Count
• FAX To Email Page Count
• FAX Color Count BackUp Count
• FAX B/W BackUp Count
• FAX Total BackUp Count
• FAX To Server Page BackUp Count
• FAX To Email Page BackUp Count
• FAX Color Error Count
• FAX B/W Error Count
• FAX To Server Page Error Count
• FAX To Email Page Error Count
• Scan To Server Page Count
• Scan To Email Page Count
• Scan To Server Page BackUp Count
• Scan To Email Page BackUp Count
• Scan To Server Page Error Count
• Scan To Email Page Error Count
Operation Procedure
1. To enter the CE mode, select the "Print Settings" in the "Print Info", and then press [OK] button.
(Refer to "6.4.2 How to Enter the CE Mode")
Figure 1 j0bs64059
2. Press the [OK] button to print the printer settings data.
• When the print has completed, it returns to the "Ready" screen.

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English