05/2014
6-244
DC SC2020
6.4.12.1 Initialization (Life) and the display of life counter
Version 1.1
General
Figure 3 j0bs64091
7. To initialize the life counter value of 2nd BTR Unit, press the [Cancel Print] button, back to previous
screen.
Figure 4 j0bs64092
8. Select "Initialize" in the [Down arrow] button, and then press [OK] button.
Figure 5 j0bs64093
9. Press the [<--] (Back) button to return to the [Printer Diag] screen.
Figure 6 j0bs64087
10. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)
To Next Page
Loading...
