05/2014
6-263
DC SC2020
General
6.4.16.7 DADF Component Check
Version 1.1
Figure 6 j0bs64190
6.4.16.7 DADF Component Check
Checks the DADF I/O components operation.
6.4.16.7.1 DADF IIT Input
Procedure
1. Use the [Down arrow] button to select [DADF Component Check], and press the [OK] button.
Figure 1 j0bs64185
2. Press the [OK] button to select [DADF IIT Input].
Figure 2 j0bs64188
3. Press the [OK] button.
Figure 3 j0bs64187
Table 2 Component Check Output
Chain Link Parameter
062 002 IIT Exposure Lamp
062 005 IIT Scan Motor (Scan direction)
062 006 IIT Scan Motor (Return direction)
062 091 Exchange To ADF
Table 1 DADF Component Check Input
Chain Link Parameter
005 102 Document Sensor
005 110 Regi Sensor
To Next Page
Loading...
Need help?
General
