05/2014
9-30
DC SC2020
9.1.7 Odor Filter Kit
Version 1.1
Installation/Removal
Figure 8 j0bs41915
12. Attach the Bracket from the removed Top Cover to the Top Cover from the Kit. (Figure 9)
Figure 9 j0bs41916
13. Attach the Top Cover.
14. For attaching the Top Cover, insert the Boss (3) on the Rear side of the Top Cover into the attach-
ment hole. (Figure 10)
Figure 10 j0bs41914
15. For attaching the Top Cover, insert the Boss on the Front side of the Top Cover into the attachment
hole. (Figure 11)
Figure 11 j0bs41913
16. Reinstall the Inner Cover.
17. Reinstall the Pillar Left Cover.
18. Reinstall the Waste Bottle.
19. Reinstall the Front Cover.
20. For attaching the Front Cover, insert the Boss of the Inner Cover into the Front Cover attachment
hole.
To Next Page
Loading...
Need help?
General
