Konica Minolta CS-7 - Page 326

326
7.18 Checkup mode
HINT
•••••••••••••••••••••••••••••••••••••
• The components that can be selected from the menu are
as shown below.
– Western Calendar (yyyymmdd)
– Western Calendar (mmddyyyy)
– Western Calendar (ddmmyyyy)
– Western Calendar (yymmdd)
– Western Calendar (mmddyy)
– Western Calendar (ddmmyy)
– Time (hhmmss)
– Arbitrary Character String
– 5 Digit Serial Number
– 4 Digit Serial Number
– 3 Digit Serial Number
* "y" represents year. Likewise, "m" represents month,
"d" represents day, "h" represents hour, "m" repre-
sents minute, and "s" represents second.
• If you select [Arbitrary character string], the input eld
is displayed.
• To delimit components using "-", press [ ] placed
between the menus. "-" is included when it is kept
pressed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
8
Set the starting and ending values using
[Occurrence Number].
• Enter the beginning value for the serial number
in [Start], and enter the ending value for the se-
rial number in [Stop].
HINT
•••••••••••••••••••••••••••••••••••••
• After the ending value is issued, the next number is
returned to the starting value.
• The number to be issued next time is displayed in [Next
Value]. If you want to return to the starting value, press
[Reset].
•••••••••••••••••••••••••••••••••••••••••••••••••••••
9
Then set the Exam. Tag. Press [Exam Tag].
• The Exam. Tag setting screen is displayed.
10
Drag and drop the Exam.Tags from [Body
Parts List] into the Exam.Tags area.
• The aligned sequence of the keys in the Exam.
Tags area is the exposure sequence. You can
modify their aligned sequence with drag and
drop operations.
• Press [Delete] to delete the Exam. Tags in the
Exam. Tag area.