Konica Minolta CS-7 - Page 331

331
7.18 Checkup mode
Chapter 7
2
Press [Perform].
• The exposure screen is displayed.
• The screen displays the preset body part tar-
geted for exposure.
3
Perform exposure.
• Configure the X-ray device settings and check
the exposure setting before making an expo-
sure.
Press the exposure switch
4
Press [ ].
• The automatic number issuing function displays
the next number.
• Continue the exposure process repeating Steps
3 and 4.
z
When the Auto Checkup is turned OFF and
the Exam. Tags are not set
The following describes the procedure when [Auto
Checkup] is turned OFF and the Exam. Tags are not
set for the preset used.
1
Display the Patient registration screen or
List screen.
• Check that the automatic issuing worked cor-
rectly.
2
Press [Perform].
• The Body part selection screen is displayed.