Konica Minolta CS-7 - Page 372

372
8.2 Dialog boxes/balloons and countermeasures
Displayed message Problems/countermeasures
This cassette has already been started reading.
Unable to delete barcode registration.
Displayed when trying to delete a cassette barcode that is
already being read.
This cassette has already been started reading.
Unable to delete jobs registered with manual registration mode.
Displayed when trying to change the order of Exam. Tags that
are already being read.
This cassette is already registered.
Register a di󰀨erent cassette.
This is displayed when trying to register a cassette that is al-
ready registered to a barcode.
This cassette is for contact mammography. Check the Exam.
Tag.
This is displayed when a bar code for a mammogram cassette
is read in to a registered exposure condition.
This cassette is for general exposure.
Check the Exam. Tag.
Displayed when a barcode of a normal exposure cassette is
read into a registered mammogram exposure condition.
This cassette is for PCM. Check the Exam. Tag. This is displayed when a bar code for a mammogram cassette
is read in to a registered exposure condition.
This character is not allowed
Displayed when an invalid character is entered.
Do not enter these characters.
This data is being output. Study output in progress. Wait until the processes end.
This data is being processed. Study processing in progress. Wait until the processes end.
This data is guarded. Displayed when trying to delete a study which is protected.
This image can't be deleted because it is being output. Displayed when trying to delete a queue while output is in prog-
ress. Delete the queue after stopping output.
Timeout occurred in image reception. Displayed when a timeout occurs while the device is receiving
an image from the DR Detector.
Tap the Exam. Tags (in the yellow frame) to re-acquire the im-
age.
Unable to clear log Displayed when deleting the log using the Log management
tool or Reject log tool fails.
Restart this device and try to delete the log again.
Unable to prepare to read CR cassette as CR Mammography
license is not installed, Please register the license.
Displayed when mammogram exposure conditions are read
with the barcode and the CR Mammography license is not reg-
istered.
Register the CR Mammography license.
Unable to receive the image.
Suspend the study, and then re-start this study.
It probably retrieve the image.
Displayed if an image may be recovered when exposure is
interrupted due to an internal error in this device. If the image
is not displayed and the DR Detector does not contain untrans-
ferred images (the same status as that observed when no expo-
sures have been carried out), the image may be recoverable by
suspending the study and displaying the exposure screen from
the list screen again.
Unable to register mammo exam tag. because CR Mammogra-
phy license is not installed. Please install the license.
This is displayed when registering mammogram exposure
conditions using a DR Detector that has not had the CR Mam-
mography license registered.
Update Success. Displayed when image transfer is successful.
Press [OK].
User: [USERNAME] has already logged in.
Log o󰀨 this user?
Displayed when attempting to log in into another account while
a user is already logged in.
Press [OK] to log in with a di󰀨erent user account.
Wireless Access Point channel setting change failed. Displayed when changing the wireless access point channel
settings fails.
Press [Close] to close the screen and then check the AeroDR
Portable RF Unit or AeroDR Portable UF Unit condition.
Wireless Access Point channel setting successfully changed. This is displayed when the channel settings of the wireless ac-
cess point has been changed.
You cannot register more than [MaxSize] images. This is displayed when trying to add an Exam. Tag exceeding
the maximum number of Exam. Tags that can be registered.