Konica Minolta CS-7 User Manual

46
3.5 Exposure screen
(9)
(8) (10)
(11)
(12)
Number Name Functions
(8) Function button
[Rotate Left]: Turns the image to the left.
HINT
• The image is rotated by 90 degree to the left from the 360 degree
position.
[Rotate Right]: Turns the image to the right.
HINT
• The image is rotated by 90 degree to the right from the 0 degree
position.
[Flip]:
Flips the image. When the image is ipped, the icon is in the selected
state.
[< Prev.]: Displays the previous image.
[Next >]: Displays the next image.
[Text]: The viewer screen is displayed. You can add an annotation.
[ROI Adjust]:
The viewer screen is displayed. You can change the ROI area.
(9) Status display Displays the current rotation status by the angle value.
(10) Extended area display button
Function buttons more than the maximum number of function buttons that can
be placed are stored. The stored function buttons pop up when the extended
area display button is pressed.
The following function buttons are set by default.
[S/G Drag]:
Switches to the operation mode used to adjust the S/G value. Pressing
it again cancels the operation mode for adjustment. You can adjust the
S and G values by dragging the image while the operation mode for
adjustment is turned on.
[Invert]: Inverts the black and white colors of the image.
(11) Exam. Tag button
Changes or adds the Exam.Tag. The Exam. Tag buttons can be switched by
pressing and holding this button.
: Changes the Exam. Tag.
: Adds the Exam. Tag.
(12) Viewer button The viewer screen is displayed.
HINT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• The patient information display area can be small-sized by setting. Emergency and medical warning marks are not displayed in
the small-sized area.
• The Reject Image button may be displayed on the tool bar depending on the setting.
• The tool bar may also be displayed vertically on the right of the work area.
• Both of the Exam.Tag buttons may be displayed simultaneously depending on the setting.
• For the [Rotate Left] and [Rotate Right] buttons, you can congure the setting to switch whether to display both the buttons
or display either one. If either one is displayed, hold down the button to switch to the other button.
• The types and locations of function buttons can be congured using the user tool.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Konica Minolta CS-7 Specifications

General

Brand	Konica Minolta
Model	CS-7
Category	Measuring Instruments
Language	English