Konica Minolta CS-7 - Page 70

70
3.7 System monitor screen
z
System monitor (Button display area is shown)
(1)
(2)
(4)
(3)
(5)
Number Name Functions
(1) Wireless button
Switches the wireless communication of the DR Detector between al-
lowed and prohibited.
:
This is displayed when the wireless communications allowed.
:
This is displayed when the wireless communication is prohibited.
(2) AeroSync button
Displayed only in Aero Sync mode.
Sets whether or not the AeroSync button is to be operated when starting
examination or exposure. Turn this on when [Large] is selected.
(3) Detection Algorithm button
Displayed only in Aero Sync mode.
Turn it on when enabling detection selection processing.
(4) Initial detection level
Sets the X-ray detection level at the time of starting examination or expo-
sure.
The buttons shown di󰀨er depending on the type of DR Detector used.
(5) Button display area
This area displays the wireless button, Aero Sync button, detection algo-
rithm button, and initial detection level.