OPERATION
3. Push the AUTO HEA DER HEIGHT button (A). The
LED light (B) s hould flash continuously indicating that
it is in standby mode and waiting for a response from
the oper ator.
Figure 3.151: Combine Header Control System
4. Briefly press the header down button (A). The header
should lower automatically and the LED light sh ould
stay illumina ted indicating that the auto height syste m
is engaged and working.
Figure 3.152: Header Down Button
5. Turn Height dial (A) to increase or decrease
ground pressure.
6. Turn the Sensitivity dial (B) to control how quickly the
AHHC reacts to varying ground conditions.
Figure 3.153: Combine Header Control System
147695 116 Revision A
To Next Page
Loading...
