HEADER ATTAC HMENT/D ETACH ME NT
14. Disengage both adapter float locks by movin g la tch (A)
away from adapter and moving both header float lock
levers (B) down (UNLOCK).
Figure 4.
27: Float Lock in UN LOCK Position
4.3.2 Detaching Header from John Deere Combine
DANGER
To avoid bodily injury or death from unexpected start-up or fall of raised machine, always stop engine,
remove key, and engage safety props before going under header for any reason.
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator ’s seat for any reason.
1. Choose a level area and position header slightly above ground. Stop engine and remove key.
147695 210 Revision A
To Next Page
Loading...
