MAINTENANCE AN D SERVICING
5.15 Transport System (Optional)
Refer to 6.3.4 Stabiliz er/Slo w Spe ed Transport Wheels, page 412 for more information.
5.15.1 Checking Wheel Bolt Torque
If a Transport System is installed, follow procedure for torquing the wheel bolts.
IMPORTAN T:
Whenever a wheel is removed and reinstalled, check
torque after one hour of operation and every 100 hours
thereafter. Maintain 80–90 ft·lbf (110–120 N·m) torque.
Follow bolt tightening sequence as shown.
Figure 5.292: Bolt Tightening Sequence
147695 393 Revision A
To Next Page
Loading...
