OPERATION
3.3 Break-in Period
NOTE:
Until y o u beco me familiar with the sound and feel of yo ur new header, be ex tra alert and attentive.
After attaching the header to the combine for the first time, follow these steps:
1. Operate the machine with reel drapers and knife running slowly for five minutes, watc hing and listening FROM
THE OPERATOR’S SEAT for binding or interfering parts.
NOTE:
Reel and side drapers will not operate until oil flow fills the lines.
2. Perform the items specified. Refer to 5.3.2 Break-In Inspection, page 257.
CAUTION
Before investigating an unusual sound or attempting to correct a problem, shut off engine and remove key.
147695
4
1
Revision A
To Next Page
Loading...
