5 Maintenance and Servicing
5.1 Preparation for Servicing
The following instructions are provided to assist Operator in the use of header.
Detailed maintenance, service, and parts information are contained in the technical manual and parts catalog which
are available from your MacDon Dealer.
CAUTION
To avoid personal injury, before servicing header or opening drive covers:
1. Fully lower the header. If necessary to service in the raised position, always engage safety props.
2. Stop engine and remove key.
3. Engage park brake.
4. Wait for all moving parts to stop.
147695 251 Revision A
To Next Page
Loading...
