MAINTENANCE AN D SERVICING
4. Push grease zerk (A) back into guard.
Figure 5.44: Guard
5. Reassemble driveline.
NOTE:
The spline
s are keyed s o that universals are
aligned. A
lign weld (A) w ith missing spline ( B)
when assem
bling.
Figure 5.45: Driveline
6. Slide d
riveshaft in hook (A) so that disc (B) drops to
secure
driveshaft, or connect to combine.
Figure 5.46: Driveline
147695 283 Revision A
To Next Page
Loading...
