Motorola RFS Series

Motorola RF Switch CLI Reference Guide
2-102
show wireless wips [configured-ap-def-essids|
configured-bad-essids|fake-ap-flood|filter-list|
suspicious-ap]
Parameters
aap-version Displays the minimum adaptive firmware version string
ap [<1-48>|<MAC>|
config [<1-48>|<MAC>]]
Status of the adopted access port
• <1-48> – Defines the index of the access port
•<MAC> – Sets the MAC address of a access port
• config [<1-1024>|<MAC>] – Status of the configured
access port.
• <1-1024> – AP index from the “show wireless ap”
command
• <MAC> – MAC address of the ap.
ap-containment
[config|table]
Rogue AP containment
• config – Rogue AP Containment Parameters
• table – Rogue AP Containment table
ap-detection-config Detected AP configuration parameters
ap-images Displays the access port images on the switch
ap-unadopted Lists unadopted access ports
ap-radio-config <MAC> Displays radio configuration
• <MAC> – Displays MAC address
approved-aps Displays approved APs detected by access port scans
authorized-aps Displays list of authorized-aps detected by the switch