Motorola RFS Series

Common Commands
2-103
channel-power
[11a|11b|11bg]
[indoor|outdoor]
Lists the channels and power levels available for a radio
• 11a – Defines the radio as 802.11a
• 11b – Defines the radio as 802.11b
• 11bg – Defines the radio as 802.11bg
These options are available for all the above radio types:
• indoor – Radio is placed indoors
• outdoor – Radio is placed outdoors
client
[exclude-list|include-list]
Wireless client configuration
• exclude-list – Sets the exclude list configuration
• include-list – Sets the include list configuration
config Displays wireless configuration information
country-code-list Displays the list of supported country names and their 2
letter IS0 3166 codes
default-ap Displays default access-port information
fw config Configures firewall parameters
hotspot query Displays hotspot query string configuration
hotspot-config <1-256> WLAN hotspot configuration for specified index
ids
[configured-bad-essids|
filter-list|configure-ap-
def-essids|fake-ap-flood
threshold|
suspicious ap signal-
strength-threshold]
Displays intrusion detection configuration parameters
• configured-bad-essids – Displays a list of configured bad
essids
• filter-list – Displays the list of currently filtered mobile
units
• configure-ap-def-essids – Displays the list of default
configured essids
• fake-ap-flood – Displays fake-ap-flood parameters
• suspicious ap signal-strength-threshold – Displays
suspicious AP parameter
• signal-strength-threshold – Displays signal strength
threshold