Motorola RFS Series

Global Configuration Commands
5-81
broadcast
[client|destination]
Configures the NTP broadcast service.
• client – Listens to NTP broadcasts
• destination <IP> {[key <1-65534>|version <1-4>]}–
Configures broadcast destination address
• IP Address – Defines the destination broadcast IP
address
• key <1-65536> – Optional. Sets the broadcast key
number
• version <1-4> – Sets the NTP version number
Note: The switch acting as an NTP client will not associate to a
broadcast IP (NTP Server) with no authentication i.e. without
using symmetric key or auto-key
broadcastdelay
<1-999999>
Defines the estimated round-trip delay.
• <1-999999> – Sets the round-trip delay in microseconds
master {<1-15>} Acts as a NTP master clock.
• <1-15> – Optional. Sets the stratum number for the NTP
master clock
peer <peer-name-or-IP>
[autokey|key|prefer|
version]
Configures the NTP peer.
• <peer-name-or-IP> – Sets the IP address or name of the
peer
• autokey {[prefer {version <1-4>}|version <1-4> {prefer}]}
– Configures an autokey peer authentication scheme.
• prefer – Optional. Prefers this peer when possible.
• version <1-4> – Optional. Configures the NTP version
to use
• key <1-65534> {[prefer {version <1-4>}|version <1-4>
{prefer}]} – Configures the autokey peer authentication
key
• key <1-65535> – Sets the peer authentication key
number