Motorola RF Switch CLI Reference Guide
20-2
ap-containment Defines the Rogue AP containment
configuration
page 20-20
ap-detection Defines the AP detection configuration page 20-21
ap-image Defines the path to upload the new image over
an AP
page 20-23
ap-ip Modifies static IP information for access ports page 20-24
ap-standby-attempts-
threshold
Sets the number of attempts after which the
stand-by switch starts adopting APs
page 20-26
ap-timeout Changes the default inactivity timeout for
access ports
page 20-27
ap-udp-port Configures the UDP port for AP L3 adoption.
Enable this option in the DHCP Server
supporting this access-port.
page 20-28
auto-select-channels Configures the channels that will be used
when ACS or DFS is performed.
page 20-29
broadcast-tx-speed Sets the rate at which broadcast and multicast
traffic is transmitted
page 20-30
client Defines the wireless client configuration page 20-31
clrscr Clears the display screen page 20-35
cluster-master-support Changes settings for cluster master support.
This is required for cluster-level functions
page 20-36
convert-ap Changes an AP’s mode of operation page 20-37
country-code Configures the country of operation. All
existing radio configurations are erased.
page 20-40
debug Debugging functions. page 20-41
Command Description Ref.
To Next Page
Loading...
Need help?
General
