Motorola RF Switch CLI Reference Guide
20-16
• aap-ipfilter-list – Configures aap IP filter listaap-lan1-ipf-
rules – Configures aap Lan 1 IP filter rules
• aap-lan1-trunking [disable|enable] – Configures trunking
on LAN1 of AAP
• disable – Disables trunking on AAP LAN 1 inerface
• enable mgt-vlan-id – Enables trunking on AAP LAN 1
inerface
• mgmt-vlan-id <1-4094> native -vlan-id – Configures
management VLAN ID on AAP between 1 and 4094
• native-vlan-id <1-4094> native-tagging –
Configures native VLAN ID on AAP between 1 and
4094
• native-tagging [tagged|untagged] –
Configures native VLAN tagging on AAP
between 1 and 4094
• tagged – Enables native VLAN tagging on
AAP LAN 1 inerface
• untagged – Disables native VLAN tagging on
AAP LAN 1 inerface
<LIST>
[ABG-Scan|aap-admin-
passwd|aap-log-
storage|aap-syslog-
srvr|adoption-policy|
country-code|
location|leds|
name|secure-code|
secure-mode-
stagging|aap-ipfilter-list |
aap-lan1-ipf-rules|aap-
lan1-trunking]
A list (eg: 1,3,7) or range (eg: 3-7) of AP indices from the
show wireless ap command
To Next Page
Loading...
