Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-18
Use {no} ap <LIST> secure-mode secret to reset a shared secret for a set of APs
(specified by LIST) to the default shared secret. It is saved in the running configuration file.
Use
{no} ap <list> secure-mode enable to disable secure-mode to a set of APs
(specified by LIST). The AP's MAC, and mode will be saved in the running configuration.
[all-aap|default-aap]
aap-lan1-trunking
Configures all AAP or default AAP LAN1 trunking
parameters
• all-aap aap-lan1-trunking – Configures the AAP LAN1
trunking parameters
• disable – Disables trunking on AAP LAN1 interface
• enable – Enables trunking on AAP LAN1 interface
• mgmt-vlan-id <1- 4094> – Configures the
management VLAN ID on AAP
• native-vlan-id <1-4094> – Configures the native
VLAN ID on AAP
Note: When the all-aap option is added in the configuration, the
newly added Adaptive APs (manual or auto) and the currently
adopted Adaptive APs are configured with the aap-lan1-trunking
command.
• default-aap aap-lan1-trunking – Configures the default
AAP LAN1 trunking parameters
• disable – Disables trunking on default AAP LAN1
interface
• enable – Enables trunking on default AAP LAN1
interface
• mgmt-vlan-id<1-4094> – Configures the
management VLAN ID on default AAP
• native-vlan-id <1-4094> – Configures the native
VLAN ID on default AAP
Note: When the default-aap option is added in the configuration,
the newly added Adaptive APs (manual or auto) are configured
with the aap-lan1-trunking command; existing configuration of
adopted Adaptive APs are not affected.