Wireless Instance
20-19
Use {no} ap <list> secure-mode-staging enable to disable secure-mode staging to
a set of APs (specified by LIST). The AP's MAC, and staging mode will be saved in the
running configuration. In this mode, switch will not send at all configured shared secret in
the Join response to the AP and AP will not get adopted by the switch.
Example
RFSwitch(config-wireless)#ap 00-15-70-14-FE-C4 location 5th
Floor SalesUnit
RFSwitch(config-wireless)#ap 1 location SJ NewPark
RFSwitch(config-wireless)#
RFSSwitch(config-wireless)#ap all-aap aap-lan1-trunking
enable mgmt-vlan-id 45 native-vlan-id 500 native-tagging
tagged
RFSSwitch(config-wireless)#