Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-74
The following is the list of parameters for the radio <1-4096>, radio [all-
11a|all-11an|all-11b|all-11bg|all-11bgn|default-11a||default-
11an|default-11b|default-11bg|default-11bgn]
commands.
lldp [hold-time|mode|
refresh-interval]
Displays the commands related to LLDP advertisements.
• hold-time <4-10>– Sets the HoldTime Multiplier value on
LCAP. The default value is 4.
• <4-10> – Specifies the range of the HoldTime
Multiplier value in seconds.
• mode – Sets the LLDP status on LCAP.
• disable – Disables the LLDP advertisements.
• refresh-interval <30-32768> – Sets the LLDP refresh
interval on LCAP. This parameter indicates the interval at
which LLDP frames are transmitted on behalf of the LLDP
agent.
• <30-32768> – Specifies the range of Refresh Interval
Value in seconds.
NOTE: By default, the LLDP mode is disabled.
acs-exception-list [<1-
200>|< LIST>]
Sets the list of channels excluded for ACS. The following
are the options:
• <1-200> – Enter the channel excluded for ACS
• <LIST> – Enter a channel list (1, 3, or 9) excluded for ACS
Note: This command executes successfully if the radio channel
assignment mode is set as ACS. Returns an error If the radio
channel assignment mode is Random or Fixed.