EasyManua.ls Logo

Motorola RFS Series

Motorola RFS Series
1054 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wireless Instance
20-75
admission-control voice
[max-mus <0-256>|
max-perc <0-100>|
max-roamed-mus <0-
256>|
res-roam-perc <0-100>]
Sets the admission control parameters for voice. The
following options are configured:
max-mus <0-256> – Configure the maximum number of
MUs to be admitted
max-perc <0-100> – Configure the maximum percentage
of air time allotted to voice traffic
max-roamed-mus <0-256> – Configure the maximum
number of roamed MUs to be admitted
res-roam-perc <0-100> –Configure the maximum
percentage of air time exclusively allotted to MUs that
have roamed. This value is calculated relative to the
max-perc value
adoption-pref-id
<0-65535>
Employs a preference identifier for this radio port. The radio
port is more likely to be adopted by a wireless switch that
is a preferred switch.
adoption-policy
[allow|deny]
Specifies adoption policy. Select from :
allow – Allows adoption
deny – Denies adoption
ampdu [min-spacing
[.25|.5|0|1|2|4|8]|
rx-limit [16383|32767|
65535|8191]|
tx-limit <0-65535>|
tx-enable {min-spacing
[.25|.5|0|1|2|4|8]|
rx-limit [16383|32767|
65535|8191]|
tx-limit <0-65535>}
Specifies the settings for the MAC Protocol frames. The
following properties are configured:
min-spacing [.25|.5|0|1|2|4|8] – The spacing between
MPDUs received in microseconds
rx-limit [8191|16283|32767|65535] – The receive buffer
limit in bytes
tx-limit <0-65535> – The transmit buffer limit in bytes
tx-enable {min-spacing [.25|.5|0|1|2|4|8]|rx-limit
[16383|32767|65535|8191]|tx-limit <0-65535>}
Optional parameters for enabling transmitting A-MPDUs

Table of Contents

Other manuals for Motorola RFS Series

Related product manuals