Motorola RFS Series User Manual

RTLS Instance
21-9
aeroscout
[enable|
multi-cast-
listen|addr]
Negates aeroscout configuration
• enable – Disable SOLE adapter
• multicast-listen-addr– Configure multicast listening
address
ekahau
[enable|engine
|multicast]
Negates ekahau configuration
• enable – Disable aeroscout external engine
• engine –reset external location engine parameters
• multicast-listen-addr– Configure multicast listening
address
reference-tag
[rfid]
Negates reference-tag configuration
• rfid– Negates configuring rfid tag
service [filter
<1-100>
{length|
memory-
bank|offset
}|inventory
{<1-
100>|default]
Negates service configuration for:
• filter <1-100> {length|memory-bank|offset} – Negates
RFID tag filter configuration for the selected index
• length – Length of tag filter
• memory-bank – Tag memory bank
• offset – Offset into the tag memory bank
• inventory [<1-100>|default] – Negates tag inventory for
the selected index or the default index
• filter – Configures tag filter for inventory
• start – Starts tag inventory
• start-trigger – Removes start trigger for tag inventory
• stop-trigger – Removes stop trigger for tag inventory
• zone – Configures logical reader
site
Negates site configuration
zone<1-48>
Negates zone configuration
ap [MAC
Address
<coordinates>]
• AA-BB-CC-DD-EE-FF – Disables access port MAC IP
address
• coordinates – Negates AP location configuration

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English