Motorola RFS Series

Motorola RF Switch CLI Reference Guide
25-18
Example
RFSwitch(config-wireless-smart-rf)#radio 1 antenna-gain 20
RFSwitch(config-wireless-smart-rf)#radio 1 coverage-area 18
RFSwitch(config-wireless-smart-rf)#radio 1 lock-auto-assign
channel
all-11a [antenna-gain|
coverage-rate|lock-auto-
assign]
Sets the radio parameters for all 802.11a radios
• antenna-gain <GAIN> – Sets the antenna-gain value to
GAIN for the selected radio
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] – Sets
the coverage rate threshold value for under-coverage
detection to the selected value from the list
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf
assignments
all-11b [antenna-gain|
coverage-rate|
lock-auto-assign]
Sets the radio parameters for all 802.11b radios
• antenna-gain <GAIN> – Sets the antenna-gain value to
GAIN for the selected radio
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] – Sets
the coverage rate threshold value for under-coverage
detection to the selected value from the list
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf
assignments
all-11bg [antenna-gain|
coverage-rate|
lock-auto-assign]
Sets the radio parameters for all 802.11bg radios
• antenna-gain <GAIN> – Sets the antenna-gain value to
GAIN for the selected radio
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] – Sets
the coverage rate threshold value for under-coverage
detection to the selected value from the list
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf
assignments