Smart RF Instance
25-17
AA-BB-CC-DD-EE-FF
[antenna-gain |
coverage-rate |
lock-auto-assign |
rescuer]
Sets the following parameters for the selected radio
• antenna-gain <GAIN> – Sets the antenna-gain value to
GAIN for the selected radio
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] – Sets
the coverage rate threshold value for under-coverage
detection to the selected value from the list
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf
assignments
• rescuer {AA-BB-CC-DD-EE-FF <4-20> <0-65535> }– Sets
the MAC address for the rescuer radio. The following
parameters are also set:
• <4-20> – Boost power to cover for the defective radio
• <0-65535> – Attenuation from the rescuer radio to
the selected radio. This is for information purposes
only
RADIO [antenna-gain|
coverage-rate|
lock-auto-assign]
Sets the radio parameters to a set of radio indices
• antenna-gain <GAIN> – Sets the antenna-gain value to
GAIN for the selected radio
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] – Sets
the coverage rate threshold value for under-coverage
detection to the selected value from the list
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf
assignments
To Next Page
Loading...
Need help?
General
