Rohde & Schwarz SMBV100B - Page 485

File and Data Management
R&S
®
SMBV100B
483User Manual 1178.4460.02 ─ 03
Exclude Frequency..................................................................................................... 484
Exclude Level..............................................................................................................484
Recall.......................................................................................................................... 484
Recall Immediate x......................................................................................................484
File Manager............................................................................................................... 485
Operation Mode
Accesses the settings for storing ("Save") and loading ("Recall") of the instrument set-
tings, or for exporting created SCPI files ("SCPI-Export").
See Chapter 9.6, "Exporting Remote Command Lists", on page 490.
Directory, File List and Filename
Note:
You access this generic standard function each time you perform one of the following:
●
Save or load (settings) files
●
Define a folder in that these files are saved
●
Navigate through the file system.
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions "New", "Select",
Save, and Recent files.
●
To access the general data list editor, use the"Edit" button
(see also Chapter 6.10.7, "List Editor", on page 341).
●
To perform standard file management functions, like create directories, move, copy,
delete files and/or directories, use the standard "File Manager" function (see Chap-
ter 9.8, "Using the File Manager", on page 491).
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 623
:MMEMory:CATalog? on page 622
Refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 815
To list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 731
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 731
Recent files
Displays the files last used.
Show SCPI List
Opens the "SCPI List", which lists the current settings of the R&S SMBV100B as SCPI
commands.
The R&S SMBV100B provides this function for Operation Mode > SCPI-Export.
Saving and Recalling Instrument Settings