Rohde & Schwarz SMBV100B - Page 836

Remote Control Commands
R&S
®
SMBV100B
834User Manual 1178.4460.02 ─ 03
●
If SCONfiguration:EXTernal:PBEHaviour 1, the I/Q ouptput type set with
the command [:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE.
Example: See Example "Enabling and configuring the analog output"
on page 833.
Usage: Event
Manual operation: See "Set to Default" on page 467
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:CATalog?
Queries the files with I/Q output settings in the default directory. Listed are files with the
file extension *.iqout.
Return values:
<Catalog> string
Usage: Query only
Manual operation: See "Save/Recall" on page 467
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:STORe <Filename>
Stores the current settings into the selected file; the file extension (*.iqout) is
assigned automatically.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 467
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.iqout.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 467
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:DELete <Filename>
Deletes the selected file from the default or specified directory. Deleted are files with
the file extension *.iqout.
SOURce Subsystem