Remote Control Commands
R&S
®
SMBV100B
900User Manual 1178.4460.02 ─ 03
Example: See Example "Finding out the used VISA ressource strings"
on page 890.
Usage: Query only
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network.
Example:
SYSTem:COMMunicate:NETWork:RESTart
// Terminates the network connection and sets it up again
Usage: Event
Manual operation: See "Restart Network" on page 563
:SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Return values:
<State> 0 | 1 | OFF | ON
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Usage: Query only
Manual operation: See "Network Status" on page 562
:SYSTem:COMMunicate:NETWork[:COMMon]:DOMain <Domain>
Determines the primary suffix of the network domain.
Parameters:
<Domain> string
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Manual operation: See "DNS Suffix" on page 564
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname <Hostname>
Sets an individual hostname for the vector signal generator.
Note:We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
This is a password-protected function. Unlock the protection level 1 to access it, see :
SYSTem:PROTect<ch>[:STATe].
Parameters:
<Hostname> string
SYSTem Subsystem
To Next Page
Loading...
