Remote Control Commands
R&S
®
SMBV100B
903User Manual 1178.4460.02 ─ 03
:SYSTem:COMMunicate:SOCKet:RESource?
Queries the visa resource string for remote control via LAN interface, using TCP/IP
socket protocol.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 890.
Usage: Query only
:SYSTem:COMMunicate:USB:RESource?
Queries the visa resource string for remote control via the USB interface.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 890.
Usage: Query only
:SYSTem:HELP:EXPort
Saves the online help as zip archive in the user directory.
Example:
:SYSTem:HELP:EXPort
MMEM:CDIR?
// "/var/user"
MMEM:CAT?
// ..,"Log,DIR,4096","help.tgz,BIN,69836600"
// confirms that help zip archive is saved.
Usage: Event
Manual operation:: "Setup > Help > Export Help to User Path"
:SYSTem:IDENtification <Identification>
Selects the mode to determine the "IDN String" and the "OPT String" for the instru-
ment, selected with command :SYSTem:LANGuage.
Note: While working in an emulation mode, the R&S SMBV100B specific command set
is disabled, that is, the SCPI command SYST:IDEN is discarded.
Parameters:
<Identification> AUTO | USER
AUTO
Automatically determines the strings.
SYSTem Subsystem
To Next Page
Loading...
