Parameters
Number Name Factory setting
p29610 Pipe filling enable 0
p29611 Pipe filling mode 0
p29612 Pipe filling speed 900 rpm
p29613 Pipe filling time 50 s
p29614 Pipe filling threshold 10%
p29615 Pipe filling monitoring time 0 s
For more information about the parameters, see Chapter "Parameters (Page 349)".
Advanced commissioning
6.3 Pump control
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB 217
To Next Page
Loading...
