Siemens SINAMICS G120XA - Scaling Specific Parameters Referred to P0514[0]; Scal Spec P514[0]; Scaling Specific Parameters Referred to P0514[1]; Scal Spec P514[1]; Scaling Specific Parameters Referred to P0514[2]; Scal Spec P514[2]; Scaling Specific Parameters Referred to P0514[3]; Scal Spec P514[3]

p0515[0...19] Scaling specific parameters referred to p0514[0] / Scal spec p514[0]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Sets the parameters with reference value in p0514[0] for the specific scaling.
p0515[0]: parameter number
p0515[1]: parameter number
p0515[2]: parameter number
...
p0515[19]: parameter number
Dependency: See also: p0514
p0516[0...19] Scaling specific parameters referred to p0514[1] / Scal spec p514[1]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Sets the parameters with reference value in p0514[1] for the specific scaling.
p0516[0]: parameter number
p0516[1]: parameter number
p0516[2]: parameter number
...
p0516[19]: parameter number
Dependency: See also: p0514
p0517[0...19] Scaling specific parameters referred to p0514[2] / Scal spec p514[2]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Sets the parameters with reference value in p0514[2] for the specific scaling.
p0517[0]: parameter number
p0517[1]: parameter number
p0517[2]: parameter number
...
p0517[19]: parameter number
Dependency: See also: p0514
p0518[0...19] Scaling specific parameters referred to p0514[3] / Scal spec p514[3]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Parameters
7.3 Parameters
SINAMICS G120XA converter
410 Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB