Siemens SINAMICS G120XA - BO: Profidrive PZD1 Receive Bit-Serial; PZD1 Recv Bitw; BO: Profidrive PZD2 Receive Bit-Serial; PZD2 Recv Bitw

12 Bit 12 ON OFF -
13 Bit 13 ON OFF -
14 Bit 14 ON OFF -
15 Bit 15 ON OFF -
Dependency: See also: p2051, p2080, p2081, p2082, p2083
Note
r2089 together with p2080 to p2084 forms five binector-connector converters.
r2090.0...15 BO: PROFIdrive PZD1 receive bit-serial / PZD1 recv bitw
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: 2468, 9204,
9206, 9360
Min:
-
Max:
-
Factory setting:
-
Description: Binector output for bit-serial interconnection of PZD1 (normally control word 1) received from the PROFIdrive
controller.
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 ON OFF -
01 Bit 1 ON OFF -
02 Bit 2 ON OFF -
03 Bit 3 ON OFF -
04 Bit 4 ON OFF -
05 Bit 5 ON OFF -
06 Bit 6 ON OFF -
07 Bit 7 ON OFF -
08 Bit 8 ON OFF -
09 Bit 9 ON OFF -
10 Bit 10 ON OFF -
11 Bit 11 ON OFF -
12 Bit 12 ON OFF -
13 Bit 13 ON OFF -
14 Bit 14 ON OFF -
15 Bit 15 ON OFF -
r2091.0...15 BO: PROFIdrive PZD2 receive bit-serial / PZD2 recv bitw
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: 2468, 9204,
9206
Min:
-
Max:
-
Factory setting:
-
Description: Binector output for bit-serial interconnection of PZD2 received from the PROFIdrive controller.
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 ON OFF -
01 Bit 1 ON OFF -
02 Bit 2 ON OFF -
03 Bit 3 ON OFF -
04 Bit 4 ON OFF -
Parameters
7.3 Parameters
SINAMICS G120XA converter
572 Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB