Siemens SINAMICS G120XA - Bearing Version Selection; Bearing Vers Sel; Scaling Specific Parameters Referred to P0514[7]; Scal Spec P514[7]; Scaling Specific Parameters Referred to P0514[8]; Scal Spec P514[8]; Scaling Specific Parameters Referred to P0514[9]; Scal Spec P514[9]

p0522[0...19] Scaling specific parameters referred to p0514[7] / Scal spec p514[7]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Sets the parameters with reference value in p0514[7] for the specific scaling.
p0522[0]: parameter number
p0522[1]: parameter number
p0522[2]: parameter number
...
p0522[19]: parameter number
Dependency: See also: p0514
p0523[0...19] Scaling specific parameters referred to p0514[8] / Scal spec p514[8]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Sets the parameters with reference value in p0514[8] for the specific scaling.
p0523[0]: parameter number
p0523[1]: parameter number
p0523[2]: parameter number
...
p0523[19]: parameter number
Dependency: See also: p0514
p0524[0...19] Scaling specific parameters referred to p0514[9] / Scal spec p514[9]
Access level: 3 Calculated: CALC_MOD_ALL Data type: Unsigned32
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Sets the parameters with reference value in p0514[9] for the specific scaling.
p0524[0]: parameter number
p0524[1]: parameter number
p0524[2]: parameter number
...
p0524[19]: parameter number
Dependency: See also: p0514
p0530[0...n] Bearing version selection / Bearing vers sel
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: C2(1, 3) Scaling: - Dynamic index: MDS, p0130
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
104
Factory setting:
0
Parameters
7.3 Parameters
SINAMICS G120XA converter
412 Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB