Siemens SINAMICS G120XA - Enable Direction of Rotation; Application Examples for Inhibiting and Enabling Direction of Rotation

6.4.2.3 Enable direction of rotation
Function description

S

S



[
\
[
\
W
\\[[
In the factory setting of the converter, the negative direction of rotation of the motor is inhibited.
Set parameter p1110 = 0 to permanently enable the negative direction of rotation.
Set parameter p1111 = 1 to permanently inhibit the positive direction of rotation.
Parameters
Table 6-48 Application examples for inhibiting and enabling the direction of rotation
Number Name Factory setting
p1110 BI: Inhibit negative direction 1
p1111 BI: Inhibit positive direction 0
Advanced commissioning
6.4 Setpoints and setpoint processing
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB 237