10.2 Replacing spare parts
10.2.1 Spare parts compatibility
Continuous development within the scope of product maintenance
Converter components are being continuously developed within the scope of product
maintenance. Product maintenance includes, for example, measures to increase the
ruggedness or hardware changes which become necessary as components are discontinued.
These further developments are "spare parts-compatible" and do not change the article
number.
In the scope of such spare parts-compatible ongoing development, plug connector or
connection positions are sometimes slightly modified. This does not cause any problems when
the components are properly used. Please take this fact into consideration in special
installation situations (e.g. allow sufficient reserve regarding the cable length).
10.2.2 Spare parts overview
The look of the spare part can differ from the picture.
Spare parts Frame size Article number
CU spare part kit, consisting of 2 sets of
labels, 1 CU door, 1 ESD cover, 2 U
clamps, 1 functional grounding clamp, 2
STO connectors, 1 RS485 connector,
and 1 set of I/O connectors
FSA ... FSJ 6SL3200-0SK10-0AA0
1 set of small parts for installation FSD ... FSG 6SL3200-0SK08-0AA0
Shield connection kit for the Power Mod‐
ule
FSA 6SL3262-1AA01-0DA0
Shield connection kit for the Control Unit FSD ... FSG 6SL3264-1EA00-0YA0
Terminal cover kit FSD 6SL3200-0SM13-0AA0
FSE 6SL3200-0SM14-0AA0
FSF 6SL3200-0SM15-0AA0
FSG 6SL3200-0SM16-0AA0
Corrective maintenance
10.2 Replacing spare parts
SINAMICS G120XA converter
832 Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
To Next Page
Loading...
