Siemens SINAMICS G120XA - BI: Binector-Connector Converter Status Word 3; Bin;Con ZSW3; BI: Binector-Connector Converter Status Word 4; Bin;Con ZSW4

p2082[0...15] BI: Binector-connector converter status word 3 / Bin/con ZSW3
Access level: 3 Calculated: - Data type: Unsigned32 / Binary
Can be changed: T, U Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: 2472
Min:
-
Max:
-
Factory setting:
0
Description: Selects bits to be sent to the PROFIdrive controller.
The individual bits are combined to form free status word 3.
Index: [0] = Bit 0
[1] = Bit 1
[2] = Bit 2
[3] = Bit 3
[4] = Bit 4
[5] = Bit 5
[6] = Bit 6
[7] = Bit 7
[8] = Bit 8
[9] = Bit 9
[10] = Bit 10
[11] = Bit 11
[12] = Bit 12
[13] = Bit 13
[14] = Bit 14
[15] = Bit 15
Dependency: See also: p2088, r2089
NOTICE
The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
p2083[0...15] BI: Binector-connector converter status word 4 / Bin/con ZSW4
Access level: 3 Calculated: - Data type: Unsigned32 / Binary
Can be changed: T, U Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: 2472
Min:
-
Max:
-
Factory setting:
0
Description: Selects bits to be sent to the PROFIdrive controller.
The individual bits are combined to form free status word 4.
Parameters
7.3 Parameters
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB 569