Siemens SINAMICS G120XA - KHP OEM Exception List; KHP OEM Excep List; KHP OEM Exception List Number of Indices for P7764; KHP OEM Qty P7764; Write Protection; Write Protection; Write Protection Multi-Master Fieldbus System Access Behavior

p7761 Write protection / Write protection
Access level: 3 Calculated: - Data type: Integer16
Can be changed: T, U Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
1
Factory setting:
0
Description: Setting for activating/deactivating the write protection for adjustable parameters.
Value: 0: Deactivate write protection
1: Activate write protection
Dependency: See also: r7760
Note
Parameters with the "WRITE_NO_LOCK" attributes are excluded from the write protection.
p7762 Write protection multi-master fieldbus system access behavior / Fieldbus acc_behav
Access level: 3 Calculated: - Data type: Integer16
Can be changed: T, U Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
1
Factory setting:
0
Description: Sets the behavior for write protection when accessing via multi-master fieldbus systems (e.g. CAN, BACnet).
Value: 0: Write access independent of p7761
1: Write access dependent on p7761
Dependency: See also: r7760, p7761
p7763 KHP OEM exception list number of indices for p7764 / KHP OEM qty p7764
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: T, U Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
1
Max:
500
Factory setting:
1
Description: Sets the number of parameters for the OEM exception list (p7764[0...n]).
p7764[0...n], with n = p7763 - 1
Dependency: See also: p7764
Note
KHP: Know-How Protection
Even if know-how protection is set, parameters in this list can be read and written to.
p7764[0...n] KHP OEM exception list / KHP OEM excep list
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: T, U Scaling: - Dynamic index: p7763
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
65535
Factory setting:
[0] 7766
[1...499] 0
Description: OEM exception list (p7764[0...n] for setting parameters that should be excluded from know-how protection.
p7764[0...n], with n = p7763 - 1
Dependency: The number of indices depends on p7763.
See also: p7763
Parameters
7.3 Parameters
SINAMICS G120XA converter
666 Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB